Brahma Controller, Brahma Sequence Controller, Oil Burner Controller, Mumbai, India
 
 

Burners Spares

  Customised Gas Trains & Gas Flow Meters

 
Gas Trains

 
  Gas Trains means that these are the items and controls which shall be used by the customer to reduce the Inlet Pressure of Gas from the source or the input point to their factory to the desired pressure at the point of the use in the Furnace, Boiler or Oven etc.
  These components shall comprise of pressure reduction valves/ regulators and filters and other safeties.
   

   
   

 
Gas Inlet Pressures

 
  These are made suited as per customer's tailor made requirements and site conditions.
  Gas Inlet Pressures are ranging from 500mbar upto 16 bar and with Outlet Pressure Ranging from 10 mbar to 500 mbar or higher.
  Flow Rates upto 2000Nm3/hr available for LPG and CNG.
   

   
   

 
Standard Gas Trains

 
  We can incorporate the following items in our Standard Gas Trains :

Ball Valves, Gas Filters, Pressure Regulator, Pressure Gauge and Pushbutton Cock, Slam Shut off Valve, Safety Release Valve, Solenoid Valves or Multiblocs or DMVD's, Minimum and Max Gas Pressure Switches, Valve Proving Systems.

  Other specific requirements for ATEX and zone 2 applications can be done by us on specific enquiries from customers.
   

   
   

 
Gas Meters MZ Series from ITRON Germany

 
  These are Turbine Wheel Flow Meters procured from Dungs, Germany.
  Gas Flow Rates range are from actual flow of 10 m3/hr to 1600 m3/hr.
  These are available in sizes from 2" , 3", 4" and 6".
  These are available with Low Frequency Reed Contact, 9 Digit Mechanical Roller Counter and Maximum allowable Gas Pressure upto 4 bar.
  We would recommend to install the gas filters of appropriate size to be installed just ahead of this gas flow meter for protection of dirt and better life and operation. The ball valves controlling
  The flow of gas to this meter should be opened or closed slowly and not with sudden jerk so as to have better operational life of the gas meter.
   


 
Gas Meters DM/DE Series from Elster / Kromschroder Germany

 
  These are Turbine Wheel Flow Meters procured directly from Elster, Germany.
  Gas Flow Rates range are from actual flow of 10 m3/hr to 1600 m3/hr.
  These are available in sizes from 1", 2", 3", 4" and 6".
  These are available with low frequency reed contact, 7 digit mechanical roller counter and maximum allowable gas pressure upto 4 bar.
  These meters are available with the option for Electronic readout, to give the instantaneous flow reading in m3/hr.
  We would recommend to install the gas filters of appropriate size to be installed just ahead of this gas flow meter for protection of dirt and better life and operation. The ball valves controlling
  The flow of gas to this meter should be opened or closed slowly and not with sudden jerk so as to have better operational life of the gas meter.
   

Gas Trains, Gas Inlet Pressures, Standard Gas Trains, Gas Meters MZ Series, Gas Meters MZ Series from ITRON Germany, Gas Meters DM, DE Series from Elster, Kromschroder Germany, Customised Gas Trains and Gas Flow Meters in mumbai, India

 
 

     Company vis Products :

  MONARCH U.S.A  |  DANFOSS Denmark  |  SUNTEC France  |  COFI Italy  |  DUNGS Germany  |  ECEE France
BACHARACH U.S.A.  |  SIEMENS Germany  |  ELSTER Germany  GIULIANI ANELLO Italy  |  ELETPLAST Italy

Yash Hitech Systems    :     +91 9820524582 | +91 9820344636 | +91 9323220221 | +91 9322310718